Read the encrypted file; if missing, read the registry copy. If neither exists, this is a fresh install or a new PC: show the request form.
The licence is signed by the registry. Any edit to it breaks the signature.
CPU ID and motherboard serial must match exactly; of system disk, MAC and Windows MachineGuid at most one may differ.
Every bound MCU UID must be connected. Each board also checks its own signed licence token. A replaced board: view mode immediately, until an Admin approves it.
The first trusted date is the server's time at approval; activation needs the PC clock within 24 hours of it. Later, a PC date earlier than the last trusted date locks the licence until an Admin unlocks it.
Perpetual: no end. Trial: view mode after the end date, which the server set. The program-run counter is a usage report only.
Every PC must be confirmed by the server at least every 10 days: by check-in (every start and daily) or by a manual re-confirmation code.
Records and reports open; programs do not run. The screen offers the matching request.
96-bit STM32 UID, board type and firmware version, on every connection.
The software passes on the token the registry signed for this UID: licence, perpetual or trial, end date, server time. Kept in flash or EEPROM with a sequence number.
ECDSA P-256 check (micro-ecc) with the registry's public key built into the firmware.
Last trusted date (only moves forward) plus running hours, so a trial ends even if the PC date is wrong.
No valid token, wrong UID or trial ended: status and reads still answer, programs and dispensing are refused.
Shared C code, tested on the PC first.
Chip ID in identity registers 25–31 and the licence check, with the ColorChef software update.
All board types, the Gateway licence routes and DD Hub forwarding.
Engineers update machines at each visit. Older firmware is shown as "board check not supported" until updated.
| Model | Board | MCU | Firmware | Change |
|---|---|---|---|---|
| DD V5 | DD Bridge | STM32F407 | 5.0.0 → 5.1.0 | dd_link LICENCE_READ (0x0090) / LICENCE_SET (0x0091); token in internal flash |
| DD V5 | DD Request System | STM32F103 | 5.0.0 → 5.1.0 | Same messages over RS485 via the Bridge; check flash space on the 64 KB part |
| DD V5 | DD Flow, Aux Prep, Aux Dispensing, Dye Pick, Dye Prep, ChemChef | STM32F407 | 5.0.x → 5.1.0 | Same as Bridge |
| DD V5 | DD Fully Auto Chemical / Dye Dispenser | STM32F407 | 5.0.0 → 5.1.0 | Same as Bridge; also reports its slave boards' UIDs |
| ColorChef V4 | Dispenser (Model 1, 2, 3, Fully Automatic) | STM32F407 | 1.0.0 → 1.1.0 | UID in identity registers 25–31; licence register block; protocol 0x0203; token in 24LC512 EEPROM |
| ColorChef V4 | Solution Maker | STM32F407 | 1.1.0 → 1.2.0 | Same as Dispenser |